1. Know Your Positioning First: "Product" vs "Container/Packaging"

This is the first thing to clarify for exports to Japan, because it determines your labeling obligations.

Japan’s Act on the Promotion of Effective Utilization of Resources requires identification marks (the “Pla-mark”) on plastic containers and packaging. However, “containers and packaging” here refers to containers and packaging of goods. Since garbage bags hold waste—not goods—general garbage bags are not classified as containers and packaging, and the Pla-mark is not mandatory.

Conversely, if you make shopping bags or retail packaging bags (bags used to hold goods), they are containers and packaging, and the Pla-mark is mandatory (printed marks must be at least 6 mm per side with clear legibility). Always confirm the end use with your Japanese customer before ordering. Different uses mean completely different compliance requirements.

2. Key Japanese Regulations to Understand

Plastic Resource Circulation Act (effective April 2022)

Covers the entire lifecycle of plastic products. Manufacturers and sellers are expected to adopt environmentally conscious design (recyclability, reduction). Generators of 250+ tons of plastic waste per year must develop reduction and recycling plans. As an export supplier, it pays to stay ahead of demand trends for recycled content and recyclable design.

Act on the Promotion of Effective Utilization of Resources

Mandates identification marks on containers and packaging (Pla-mark, paper mark, etc.), as described above. General garbage bags themselves are out of scope, but caution is needed if you also supply related items.

Containers and Packaging Recycling Act

Imposes recycling obligations on businesses involved in containers and packaging, mainly affecting domestic sellers in Japan.

Food Sanitation Act (food contact cases)

If garbage bags are used in food factories (holding ingredients or food waste), they fall under “food utensils, containers and packaging” and must comply with material and elution test specifications for synthetic resins (heavy metals, potassium permanganate consumption, evaporation residue, etc.).

The Positive List system was fully enforced on June 1, 2025: the 5-year transitional period that began in June 2020 ended on May 31, 2025, and manufacturers must now prove products are made only from listed raw materials (21 base-material types plus additives). In addition, the standards were revised in June 2025 and June 2026, reorganizing food categories and adjusting elution test conditions (water/4% acetic acid above 100°C changed from 95°C to 90°C), with a grace period through June 1, 2030. Domestic manufacturers and sellers have business notification duties and, under Article 53 of the Food Sanitation Act, an obligation to provide compliance information to trading partners.

Chemical substance controls

Additives in raw materials and color masterbatches must avoid substances restricted under Japan’s CSCL (Chemical Substances Control Law) and PRTR law, and no Japanese-controlled harmful substances should be used.

3. Labeling and Packaging Requirements

Material labeling should use the symbols defined in JIS K 6899-1 (ISO 1043-1), such as PE, LLDPE, HDPE; product marking is recommended to follow JIS K 6999 in the “>PE<” format. While material labeling is not legally required, Japanese customers generally expect it—it signals professionalism.

Commonly requested items: material, dimensions and specifications, capacity and quantity, production lot number, and country of origin (Made in China). Bilingual (Japanese) labeling on outer cartons is appreciated, and lot numbers must be clear and traceable.

4. Documents Customers Usually Require

  • Lot-by-lot inspection reports: thickness, tensile strength, elongation at break, seal strength, dart impact, etc. (based on JIS test methods)
  • Material safety statements: no recycled content, free from harmful substances (elution test reports for food-contact applications)
  • SDS and compliance declarations (component declarations similar to REACH requirements)
  • Certificate of origin, packing list, commercial invoice; some buyers request third-party inspection (SGS, etc.)

5. Practical Advice for Exporting to Japan

1. Confirm the end use before ordering (general industrial / food factory / municipal sorting). Use determines material and testing requirements.
2. Require pre-production samples: Japanese customers value physical confirmation, and samples for color, printing, and thickness should be kept.
3. Choose a factory with a proven export track record to Japan, multiple production lines, and formulation capability—so it can supply stably during raw material fluctuations and adjust formulations (e.g., LLDPE/LDPE blends) to meet Japanese requirements.
4. Build a lot-traceability system so the cause of any complaint can be identified quickly.

Summary

Compliance for exporting to Japan comes down to three things: knowing the product vs. container/packaging distinction, understanding food-contact and plastic circulation regulations, and preparing inspection documents and labeling. Choosing a supplier that understands Japanese market rules saves you a lot of trouble.

Looking for a Reliable Plastic Bag Manufacturer?

Shanghai Zhisheng Plastic has over 20 years of experience exporting high-quality plastic products to markets worldwide. With 5 production lines and rigorous quality control, we deliver consistent quality at competitive prices. Contact us today for a free quote or sample request.